The Dremel (rotary tool) Add-On is the perfect companion for the Stealth Press, enabling you to elevate your crafting experience. Its seamless integration, versatility, and precision make it an essential tool for anyone who seeks to unleash their creativity.
This mod seamlessly integrates with the Stealth Press core, unlocking a broader spectrum of use cases and applications.
You can now tackle a wider range of projects easier and faster - from fabricating engineering components to crafting intricate jewellery by using variety of rotary tool accessories.
More information about Stealth Press (core) and project files are here.
Printed Parts | |
---|---|
Printed parts | 22 |
Full assembly manual + special complimentary sandwich plate model, available for project supporters only.
Here are print guidelines for you to follow in order to have decent success with printing parts:
3D PRINTING PROCESS | FDM (fused deposition modeling) |
INFILL TYPE | Grid, Gyroid, Honeycomb, Triangle or Cubic |
MATERIAL | ASA, ASA-CF, ABS, ABS+, ABS-CF |
INFILL PERCENTAGE | 40% - 60% |
LAYER HEIGHT | Recommended: 0.2mm |
WALL COUNT | Recommended: 4 |
SOLID TOP/BOTTOM LAYERS | Recommended: 5 |
EXTRUSION WIDTH | Forced 0.4mm |
PLA, PLA+, and PETG are also considerable filament choices. However, take into account that power tools radiates some indirect heat. The usage of less temperature-stable filaments may result in part deformations over time.
A wall count of 4 is an absolute must to ensure the structural integrity of the parts. There is no need to go over the top with this. 4 walls are perfectly fine for this particular build.
The parts use this naming convention:
Project is built and tested with Dremel 3000 series. Other models and other brands sharing the same dimensions for main attachment screw might fit.
Any.
Date | Change |
22.01.2024 | Initial version (Rev1) |
The author marked this model as their own original creation.