Canned food stacking system

Simple, expandable, parametric can stacking system.

Instructions

The SCAD file has some parameters at the top that you can manipulate to match your can. The connection module can also be tweaked if you want to try a different shape (it will automatically be mirrored in the positive and negative. Change the parameters to match your cans and then print out as many as you need. Glue/Tape the tabs together and you've got a stacking system!

// platform height

p_h = 1.5;

// can height - between ridges

can_h = 106.5;

// can diameter

can_d = 73;

// bump height

b_h = 15;

// connection length

c_l = 4;

// center_cut percent

c_c = 0.4;

//connection circle

con_d = 10;

//minokowski

min = 5;

// how fine the circles should be, higher is better, lower is faster to render

fn=20;

Category: Kitchen & Dining