Ratchet strap winder

If you print this model, please share pictures.
First straighten the band so that there are no twists in it. Place the strap securely between the two forks against a flat surface (table or floor, also se GIF), make sure it is centered. Then, carefully use the drill to wind the strap up, ensuring a controlled and gradual motion while guiding it with the other hand, 

This ratchet strap winder you can purchase a physical product there:
https://www.etsy.com/se-en/listing/1682827185/ratchet-strap-winder-tool-strap-winder

 

Print settings

I Printed mine in PETG for extra strengt and also to consider PETG if you're storing it in a shed or outside. I printed at layer height of 0.20 mm and almost 100% infill to make sure that it would be as strong as possible. 

No supports needed. 

A brim may be needed around the perimeter of the main body due to its height relative to its narrower base, or use glue stick

If you have any questions or concerns regarding this model please do not hesitate to contact me.
Please kindly take a moment to show your support by giving this a LIKE and also hope you find it interesting and valuable enough to download it!
Your support is truly appreciated and will greatly help me in my future endeavors! If you have any questions, do not hesitate to contact me.
Thank you so much for your support and I hope you enjoy it!

If you have reached this point - thank you! Your support would mean the world to me as I pursue my passion for creating designs that people will (hopefully) enjoy using. If you would like to contribute, please consider donating any amount. Thank you for considering it!
You can make a donation here:
https://www.paypal.com/paypalme/davidpersson80?country.x=SE&locale.x=sv_SE