Travel Container for Cotton Swabs

If you print this model, please share pictures.
Reasonably sized format if you don't want to carry an entire bulk package along your travels as it will fit maximum 5pcs of Cotton swab of Maximum length 83 mm (3 1/4 inches), inside diameter of the main body is ø14 mm (ø9/16 inches) . 

It has a screw cap for safe keeping of swabs.
(Measurements on drawing are in millimeters.)

PRINT SETTINGS

Time to print: 120 minutes
Used filament: 9 grams
Dimensions: L: 87,5mm ø20

The file consists of the screw cap and main container body
They will print fine without any supports at layer height 0,15mm 20% infill. 

A brim may be needed around the perimeter of the main body due to its height relative to its narrower base, or use glue stick (I used glue).

Please kindly take a moment to show your support by giving this a LIKE and downloading it. Thank you so much for your support and I hope you enjoy it!