Higher Education Monster Truck

Multi part model of Higher Education from Monster Jam. Requires glue and a few optional screws.
15
62
1
636
updated January 15, 2024

Description

PDF

Print all parts. Use provided images for appropriate colors, color changes, and assembly. 

No special printing instructions, use standard settings. All parts should be oriented so no supports are needed. Suggested colors and any specific assembly instructions are indicated in the notes on each STL. 

Assembly:

The body may be glued to the chassis, or an M3x18 screw can be used through the center of the ‘body’ and into the ‘joiners’ that are inserted through the chassis pieces. The roof may be glued to the body or screwed to the body from inside the using 6x M3x8 screws (do this step after the body is attached to the chassis). I opted for screws in these two areas so that if I ever redesigned the chassis or designed a new monster truck body, I could swap them out. 

Print tires in TPU. Insert wheels from the front. I pushed them in as far as I could by hand, then set them on the ground and stepped on them to seat the wheel. Slide the axel halves through the chassis first, then carefully press the wheels onto them. 

Enjoy!

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more