5X4 Reducer for Oneida Super Dust Deputy

Customized version of https://www.thingiverse.com/thing:2015939. This was designed to work as a reducer for the inlet of Oneida's 5" Super Dust Deputy. I designed this to fit internally to the opening to avoid having an internal step down and reduce turbulence. The reducer is sized to fit a 4" flex duct on the smaller end. This slips easily into the opening in the Super Dust Deputy as designed but is not sloppy. It can be secured with foil tape or a bead of sealant. You should print a test ring of the larger side to ensure fit in your cyclone.

I was unable to get the online Thingiverse customizer to work properly and ended up using OpenScad on my PC per this tutorial. https://www.dr-lex.be/3d-printing/customizer.html

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

38

Filament: Sunlu PETG Black

Notes:

Printed with a brim to aid in adhesion of the small contact area with the bed.

Customized for purpose