AMS Lite rotary elements replacement

AMS Lite rotary elements replacement for spools with interior diameter under 55 mm.

For spools with the interior diameter under 55mm that don't fit on the Bambu Lab rotary parts I only found adapters that fit on the rotary element and the spools will have a lot of offset, so big consoles and off balance and pulling sideways of the filament and so on.

I designed replacements for the BL rotary elements. You just pull out the factory elements and insert the two new elements designed with the BL color code (GREEN - square fitment and YELLOW - hexagon fitment). The new parts don't have the rotating spring effect but they work just fine like any other spool holder.

The round limiter end caps are 46mm in diameter, so you can fit any spool with the interior diameter above 48mm.

You can glue together the stand alone limiter end caps or no not. I glued them on the adapters because I like to have an inetrior limiter for the spool, too…so that there won't be any kind of friction between the spools and the AMS body. I separated the interior end caps from the big parts so supports will not be necessary. Filament save and time save also.

Enjoy!