EVA 3.0 Beacon Rev H Default Fan Duct

Default fan duct for EVA 3.0 + Beacon Rev H LP
8
82
0
620
updated January 15, 2024

Description

PDF

This is the standard fan duct (Bottom Horns, as mentioned on the EVA site) with mounting holes for the Beacon Eddy Current Surface Scanner Rev H. 

Updated the height of the mounting platform to allow for the recommended 2.6 mm clearance between sensor and nozzle. This results in not enough room being available for heat set inserts for the beacon mount, so changed the mounting hole sizes to 3 mm. The hole for connecting the fan duct to the fan shroud still uses heat set inserts.

DO NOT use heat set inserts for the beacon mount. The M3 screws will cut their own threads. Recommend using 6mm M3 screws.

Offsets: X: 0, Y: 16.98

Note 1: The USB connector housing on the Beacon will have to be de-soldered and the cable directly soldered to the beacon as there isn't enough clearance even with the low profile version.

Note 2: This is only for the Beacon Rev H Low Profile version and may not work with Rev D without additional modifications.

 

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

Updated the height of the mounting platform to allow for the recommended 2.6 mm clearance between sensor and nozzle. 

License