Cyberpunk 2077 Johnny Silverhand's Malorian Arms 3516 screw assembly and more accurate details

Assembly is a bit difficult because it has to be screwed together in a specific order, but I made a video about it. I hope it's helpful.

Most of the models in the All.3mf file are equipped with support and seam and oriented to fit even a Prusa Mini. (in prusa slicer) (new model versions need to be equipped with the older ones support and seam)

Support suggestion: use “on build plate only”: organic on the 2 big parts and snug everywhere else.

You can use superglue on most of the places if you want, but I like it if things can be disassembled.

Suggested screws: M3, (mostly) countersunk (first number is needed, second is optional)

• 5 mm 2+2 pcs
• 10 mm 2+1 pcs
• 16 mm 5+2 pcs
• 20 mm 5 pcs
• 20-30 mm 2 pcs

      M3 Nut 6+5 pcs (You can add 2 into the grip and some to the spring)

      Some kind of spring or rubber band.

      Small amount of any weak glue or glue pads.

You can asseble it without a spring/rubber but there is nothing to hold the slide in place.

The main frame has 3 versions (things on the side), the rotary thing has 2 (text in/out).

You can put a bullet inside of the barrel from the back and also under the slide (it can hide the electronics)

3 or 4 pieces of electronics can be placed:

1. The 2 signature LEDs can be put in the rotary thing with enough room for a battery.
2. On the top of the grip there are 2 red LEDs.
3. There are 2-3 LEDs in the front pod.
4. If You choose to put a laser in that pod.

2-3-4 can be  powered from the magazine.

Paintings:

• Magazine and the shine things: Revell enamel steel (91)
• Grip:  Revell enamel satin purple red (sm 331) painted on the inside
• Everything else is the Fuse 1's own PA12's original color.

The prototype was printed entirely on Prusa Mini.

The final version was printed on Formlabs Fuse 1 and the grip was printed on a Phrozen sonic mini 8k.

If you like the model, please consider supporting the original creator and/or me.

BTC: bc1qzrppwsp9fh0evyxkf9lpmlfv7gstltuskftl9y

The original model is really nice, but the slide cannot be moved to my liking. I started to remix it, but after some research, I found details after details that I wanted to correct. The changes are based on the game's version of the pistol (images included).

Changes from the original:

• Most of the pistol can be screwed together. (Also, You can disassemble it.)
• The whole slide includes that ring like thing too (slidefront). Sadly I have not yet seen a single (free or paid) model on the wide Internet where this was done correctly.
• The slide and everything it comes into contact with has been modified so that it can be pulled up greatly (just like in the game) and also provides space for a spring/rubber. For this, the Barrel, where the spring is connected (You have 4 length option), also had to be modified. There is 1 fix and 1 optional endstop for the slide.
• The rotating stuff has merged together and hollowed out to leave room for the electronics.
• The LEDs on the back of the rotary thing are connected to it, ensuring they rotate in sync.
• The housing of the light/laser (on the left front) equipped with a patent and a locking "mechanism" and can accommodate a 12 mm diameter laser. (Yupp, it's not true to the game, but looks cool.)
• The screws from the handle were packed away.
• The things protruding from the side of the frame have been put in their exact place. (3 variant included.)
• The font for all the lettering on the gun is unknown to me, so I had to make my own. With this I rewrote all texts (except "Malorian"). Font attached, but only used characters are included.
• No need for any magnets, magazine is now snap in stile, the slide don't need it because of the new spring/rubber and the rotary thing is merged together.