All new redesigned from the ground up, camera holder!
12
110
4
647
updated January 15, 2024

Description

PDF

This here is a great camera holder!

This fits the SV07+ and maybe the SV07 non + variant. This is similar the the one I tried originally but it has so many little issues I decied to just design this one from the ground up. This model will not move around much at all nor compromise critical supports.

There are two mounting positions available, if you use the set of holes furthest away from where the camera sits, you will be very close to the klipper screen. This method is suitable for smaller cameras, and will provide a great view point. If you use the mounting holes in near the neck of the camera support as I have, you will be able to use wide cameras and you also gain more stability by pushing the mount against the z gantry support. Printing at high speed should not cause your camera to rattle around. 

There are some screws I made up quickly also, they do hurt to turn but you will probably be using plyers anyways, if you are they provide excellent grip. The screws are ¼" x 20 which is typically the standard in my region of the world. there are a few different lengths depending on what your camera will accept. 

I recommend removing the locking washer on the long screws for a better fitment.

 

Printed at 100mm/s supports only in the holes. walls at 3 loops, 15% infill shell layers at 3, layers at 0.20 1hr to print. 

Tags



Model origin

The author marked this model as their own original creation.

License