Split up specific stls for printing with different colors in case you have an MMU or equivalent.
I printed mine at 120% with plenty of room on the build plate. I think 145% is the largest you can go without splitting things up even more.
Because MMU, you can do things like import all of Ori_2_h and Ori_2_j at the same time and print them like a single part. Keeps the front of the ship stronger with less seam gap. Printing the window parts along with Ori_2_ha and Ori_2_ja can also save you some finger ache as well. Make sure to uncheck “Clip multi-part objects” in Print Settings > Advanced if you do this to eliminate part seams.
Also make sure you set much larger purging volumes going from yellow to white. Even 240mm3 wasn't nearly enough to get rid of yellow tinting the white. Or just print the weapon dish and it's background tip separately from the rest of the front part as I did; you'll get a less clamped together front end but it went fine for me since I printed h and j as one piece.
Also I only upload the MMU'd parts. There are a few pieces that are a single color so I didn't touch nor upload them. You still need to download the original model to have everything.
Original model by Martin Taichl.
The author remixed this model.