Stealthburner-Orbiter 2.0 w/Filament Sensor, Filametrix and CPAP

I found all the things I wanted in my Stealthburner to work with my ERCF and combined them to complete this. I have remixed all these parts to work with this setup. None of the original printed parts for the Stealthburner can be used. You can download the original Filametrix files, only the cutting arm has been changed to work with this. This is not a completed project yet, and still in the prototype stages. I have printed all the files and have a complete tool head, everything fits but clearances are extremely tight. I printed everything in ASA with Voron print settings. All the parts can be printed with no supports except the Orbiter2-Back which will need tree supports for the combined sensor body. You can refer to the original model instructions (in the links) or Images Ive included to put it together. I will add the BOM soon to make it easier to build from scratch. When installing the Orbiter 2.0, the Motor will need to be removed and installed from the back into the grooves then twisted to line back up with the screws again. You will also need to find your Stealthburner Hotend mount that has the Filametrix. Please reach out if you are having any issues that need to be addressed. I will do my best to fix anything that might come up. Thank you, to all the creators that made the original models for me to remix. They spent alot of time on all these parts for me throw them in a bowl and mix them all together.

I remixed all the original files so they would work together.