osVAC neo F32-H35 adapter

osVAC neo F32 to H35 adapter for 35mm Kärcher hoses
5
134
0
592
updated March 29, 2024

Description

PDF

I bought a Kärcher suction hose extension and unfortunately it does not have a 32mm hose as the one that came with my Kärcher vacuum, but has an inner diametre of 35mm. So I created this F32 to H35 adapter.

Hint: the first 5cm of the mentioned Kärcher hose is not threaded, so you have to cut it off to fit the osVAC adapter.

osVACneo-H35F32-02 works best for 0.4 nozzles at 0.2mm layer height
osVACneo-H35F32-03 works best for 0.6 nozzle at 0.3mm layer height

If you have trouble loosening the slip ring, try printing this tool or use a strap wrench.

Take a look at the documentation for more information about the osVAC neo system.

---

Ich habe eine Kärcher Saugschlauchverlängerung gekauft, doch dieser hat nicht, wie der Schlauch welcher mit meinem Kärcher Staubsauger geliefert wurde, einen 32mm Innendurchmesser, sondern 35mm. Deshalb habe ich diesen F32 auf H35 Adapter erstellt.

Hinweis: die ersten 5cm des erwähnten Kärcher Schlauchs, haben kein Gewinde, deshalb muss man diese abscheiden um den osVAC Adapter anschliessen zu können.

osVACneo-H35F32-02 eignet sich am besten für 0.4er Düsen bei 0.2mm Schichthöhe
osVACneo-H35F32-03 eignet sich am besten für 0.6er Düsen bei 0.3mm Schichthöhe

Wenn du Probleme beim Lösen des Drehrings hast, drucke dieses Tool oder benutze einen Bandschlüssel.

Wirf einen Blick in die Dokumentation, wenn du mehr über das osVAC neo System erfahren möchtest.

Tags



Model origin

The author marked this model as their own original creation.

License