Inter-Tech ITX-601 ITX-603 5.25" storage expansion

A little expansion top-hat for the Inter-Tech ITX-601 case, the mounting mechanism is a bit awkward but for my first crack at case expansion it's fine.

The extension bay is for standard 5.25" units, in my case a 4-bay 2.5" drive carrier.

For assembly I used standard fan mounting screws (12 needed all in all).

You need to print:

• 2x hooks for the front chassis lip catch
• 2x back clip to attach the extension to the case in the back with original screws
• 1x of each bracket
• 4x holders - first attach the holders to the brackets to align the holes on the roof of the expansion, mount the unit and then screw it all in at the top.
• 1x case.