Rapido 2 UHF Stealthburner Kit- LW Toolhead

Decided to update the Stealthburner for the Rapido 2 UHF version. This is a remix of the amazing UHF mod by bythorthunder.

 (https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf)

This part also comes with the cooling angry face, and the back side of the cooling assembly. Hope you all like it! 

Installation:

Check github page for more information…

Take off black sock, unscrew 3 titanium screws (small sliver ones) and rotate cables 120degs so that it lines up with the cable management port! 

Print Settings:

0.4mm nozzle

0.2 layer height (haven't tried 0.1 but might look nicer)

4 perimeters 

40% infill

5 top/bottom layers 

ASA-CF was used in the picture. 

Update: This model will also fit the normal UHF cowling if you're not into the lightweight look. Just take my Angry Face stl, and Back Piece stl and combine with the UHF cowling in the github link below. Happy printing! 

Now updated for the Rapido 2, and the UHF