Creality Sprite Pro cable strain relief

Creality Sprite Pro cable strain relief, to support cable at the top of the gantry
3
22
0
336
updated January 15, 2024

Description

PDF

I recently had to replace a broken cable on my Sprite Pro. So I printed a strain relief to replace the original one. However the cable kept rubbing against one of the uprights.

So I designed this to support the cable from the top (based on this idea Creality Sprite Extruder (Pro) - Cable Holder by eoyilmaz | Download free STL model | Printables.com but as my Ender 3 v2 Neo didn't have the correct channel at the top I designed a new one that is similar)

I printed it in Creality PLA - CF. They were printed in the orientation shown in the third picture. I used supports for the overhang on the bracket piece

You will need 2 M3 heat thread inserts to go into the piece that the cable goes through. Then this gets bolted to the bracket piece

I then used 2 M3 T nuts and bolts to fit it to the top of my gantry.

Update 15/01/2024 I added a bowden tube holder to the model as well, as my tube was getting snagged

 

Model origin

The author marked this model as their own original creation.

License