Hexagon Modular Drawers 200mm Depth - V2 - Added Inner Filler Panels

I needed some modular drawers so I made these hexagon modular drawers, there are 4 styles and all come in 3 depths, 100, 150, & 200 mm depths.

I printed the Enclosures on .2mm Speed and the drawers on .15mm Structural, leave the enclosures upright and you don't need supports, place the drawers in the orientation that you would use them and I did not need supports either.

If you have already downloaded please use the new Top Drawer v2, I had a measurement off.