Graber Sliding Panel Shade Hanging Brackets

(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs )

I was given a set of sliding panel shades that I repurposed as a video conference backdrop for my office space. These clips slide on to the top of the panels, and have a hole for hanging the panel from the wall or ceiling using a drywall screw. Two should be sufficient for hanging from the wall, but 3-4 may be needed for securely hanging from the ceiling.

I believe these are Graber or Springs Window Fashions brand shades, but was unable to confirm for certain. Should work with any sliding panel shade that uses the ~6mm thick aluminum extrusion shown in the photo above.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/1VJcScESCD7

Print Settings

Printer Brand:

Creality

Printer: 

CR-10S

Rafts:

No

Supports: 

No

Resolution:

1.0 nozzle x 0.32 layer

Infill: 

100

Filament: Amazon Basics PETG Green

Notes:

When printing these one at a time, especially if using with a 1.0mm nozzle, you may need to turn fan speed to 100% to ensure the layers solidify quickly enough.

Category: 3D Printing