Hobbywing Max6 G2 mount for Traxxas XRT

Remix of mounting plate to allow new Max6 G2 variant to fit XRT with no chassis mods when using a 90mm motor (eg. 5690).  Fitment is tight when using a 5690, a 4990 should work with additional room due to the smaller diameter.  When installing fasten the plate to the ESC using 4 cap head screws and then install the plate with 2 m3 button heads from underneath the chassis.  I've tested using PETG with 5 walls, 5 top/bottom layers, and 15% gyriod infill and found it to be sufficient. 

Remix to fit G2's sensor lead with a 90mm motor in a XRT.  ESC is moved forward approx 5mm against OEM antenna mount to allow additional room for the sensor cable.  It is tight with a 5690 but does fit without modification to the chassis.