John Company 2 Insert / Organizer

This insert for John Company 2 completely replaces the thermoformed insert supplied with the board game.  It was designed to be as light as possible, weighing no more than 500 grams (I don't like inserts that are too heavy :) ).

It simplifies and speeds up setup. All trays in this insert can be used during the game, while those used for setup can remain in the box.

Sleeves are supported, including premium sleeves. Vertical storage is also supported, without any lid lift.

I suggest this distribution of cards in card holders:

Large cards:

• Deck 1: Prestige & Blackmail
• Deck 2: Setup, Crown AI & Office
• Deck 3: Law & Company failure

Small cards:

• Deck 1: Luxury & Promise (5/6)
• Deck 2: Shipyard & workshops
• Deck 3: Scenario (all except 1813) & Promise (1/6)
• Deck 4 (separate): Scenario (1813) & Firm Strategy

Printing this insert requires no supports and presents no particular difficulties. Each tray must be printed once, except for Family trays which must be printed twice each and the Large Cards Desk which must be printed three times. I recommend a layer height of 0.3mm.