DBM SNOWBLOWER RC M10 TRX4 SCX10II (V2)

Every comments and suggestion is highly appreciate.

The file include the instruction.

the Blower come with the SCX10 V2 and TRX4 mount

Update 29-10-2023 : Add harness to connect the blower to a Kyosho Blizzard (Beta version) 

Update 21-10-2023 : Add press fit adapter for servo that dont have different adapter, updated Tambour V3 for better bearing fit and left side too, added clearance for bolt on left side and right side for bolt that hold the auger. Add the 5mm to 3.175mm shaft motor adapter

Update 09-09-2023 : Add the Scx10 v2 mount , add the belt driven possibilty, minor change in tolerance for better printer selection

You have the choice with the direct drive motor or belt drive 

you have the choice with the micro servo on the chute or manual rod

You will need to complete:

1x Motor with really low kv rating such 1000kv or less
https://www.horizonhobby.com/product/480b-bl-outrunner-motor-960kv-reverseshaft/EFL4716.html

OR

1x Motor for belt drive only Max 3670 motor and Max 2500Kv if you're using the 16T belt pinion

1x Esc 30amp minimum
https://www.horizonhobby.com/product/30-amp-3s-4s-telemetry-esc-conscendoevolution/EFLA1030E.html

1x hex kit for 5mm shaft if direct drive motor is selectioned
https://www.horizonhobby.com/product/prop-adapter-and-spinner-set-radianpro/EFL1018.html

1x servo motor 270deg (no need to modify the servo to turn 360deg but you can if you want)
amazon.ca/-/fr/ZOSKAY-num%C3%A9rique-voitures-t%C3%A9l%C3%
A9command%C3%A9es-%C3%A9chelle/dp/B07Q3Y3T7J/ref=sr_1_6?crid=3V9O7C6T00025
&keywords=20+kg+270+degree&qid=1640977821&sprefix=20kg+270%2Caps%2C86&sr=8-6

3x spring pin 3/16 dia. x 9/16 lg or 3x bolt M5 with the head cut
https://www.fastenal.com/products/details/64137

1x pinion gear 32p spline 12t (optional)

1x 16t or 20t GT2 pinion for belt operation (recommended 16T)(optional)

1x 200mm GT2 belt (optional)

6x bearing 5 x 11 x 4

1x bearing 17 x 26 x 5

4x bearing 12 x 18 x 4

1X bearing 20 x 27 x 4 (optional) Belt drive system 

1x assortment kit M3 screw or kit with M3,M4,M5 with enough M3
https://www.cafr.ebay.ca/itm/151896165844?var=451085277370

1x steel rod 5/32 dia. x 9 13/16 lg. Brass or Stainless work great too

1x steel rod 3/16 dia. x 2 7/8 lg. Brass or Stainless work great too

• your battery 2S is enough with at least 3000mah

How to print:
all moving parts : 80% infill and 1.2mm to 1.6 mm wall thickness
all body parts : 20% infill and 1.2mm of wall thickness
some parts require support (name_sp)
some parts require flex material (name_flex) (you can aslo print in rigid plastic)