Cable Holder for Ikea Ivar (USB-Cable)

Befor printing check which Version of Ikea Ivar you have. There are two one 30cm and one 50cm.  Chose the right file for printing. In your slicer press the auto rotate for easier printing.

No supports needed!

Preparation after printing:

For the screw version:

1. Position the 3D-printed cable holder at the desired spot on the Ivar shelf.
2. Use a drill or screwdriver to secure the cable holder with the provided screws.

For the tape version:

1. Clean the surface of the Ivar shelf where you want to attach the cable holder, ensuring it's free from dust and grease.
2. Remove the protective film from one side of the double-sided tape and attach it to the back of the 3D-printed cable holder.
3. Position the cable holder on the Ivar shelf, press it firmly to ensure good adhesion.
4. Wait an appropriate time after attachment tape before placing cables in the holder to ensure a stable connection.
5. Consider the weight capacity of the tape and avoid overloading the cable holder to ensure secure attachment.

Feel free to post a make or modify it for your shelf. I made it myself in fusion 360!