Electric Guitar Wall Mount

30.09.24 update: Still holds up, no issues. I can safely say this has held my guitar up for close to a year now without breaking.


Wall mount for my HB ST-20HSS SBK electric guitar (Modern C neck, 42mm nut), should work with any strat style neck.

Has a wireframe structure that's strong enough to hold the guitar without any issues. 

It's been going strong holding my guitar for the last ~3 months without any issues. 

I recommend adding electrical tape / heat shrink / something rubbery around the holder's point of contact with the guitar in order to protect the paint on the guitar and make sure it doesn't rub off on the hard plastic.

Mounts to the wall with countersunk drywall/wood screws ~4mm in diameter, top two holes are 45mm apart from each other and the bottom one is 65mm down. 

.STEP file included in case you wanna make modifications, though that is a bit difficult with this style of design.

Heavily inspired by XYZ_Pierre's classical guitar wall mount, though redesigned from scratch to be more robust and fitted to the neck profile of my electric guitar.

I printed mine from PLA with 7 walls and 42% Gyroid infill. This is gonna be holding your guitar, which is probably worth a bit more than some filament, so you should probably make it very strong with a ton of walls.