Galaxy Watch 6 integrated Holder with Charger

UPDATE: Have uploaded a new version of the outer part, where the cable goes trough the case and the magnetig pad is 90° rotated. One cable less :) The inner part can stay the same. 

Haven't found a good solution to charge my Galaxy watch 6 40mm without having the mess with the cable. So I came up with the idea to have something around the charger itself. 

It was a quick and dirty designe but it works very well for me. You just wrap the cable around and click the outer part in place. The inner part has to be printed with supports, maybe I will change the designe to print it without in near future.

The diameter of the original charging pad, that came with the watch is ~26.2mm, don't know if that designe works with other Galaxy watches.

I used this cheap charger from Aliexpress. 

https://de.aliexpress.com/item/1005005586923234.html?spm=a2g0o.order_list.order_list_main.35.25c15c5fnjEmfI&gatewayAdapt=glo2deu

For Smartwatches it has enough power to charg them without any problems.

Will be happy about tipps :)