Leveling Knobs for most smaller printers

This is a Bed Leveling Knob for the Right side of the build plate. The difference between the Right and Left is in which way the numbers go on the outside rim of the knobs. Right Knobs the Numbers go Clockwise, Left Counter Clockwise.

The differences made to his files are as follows:

• Knobs diameter increased to 38mm
• Knobs reduced to 11mm
• Center has been raised to 12.5mm so the outside edges don't run on the plate carrier.
• Center Nut Insert has been changed to an M4x10x6 Threaded Nut Insert (Press Fit).

Parts Needed: 4 M4106 Threaded Press Fit Nut Inserts.

This was designed for the Fokoos Odin5 F3 Printer, but can be used with any smaller Printer such as the Creality 3 , but really they will work with any printer. The numbering helps you to perfectly dial in manually the height of your bed. There are plenty of knobs out there, but very few are large enough to handle easily with numbers to help you count the revolutions.

If you download and print, please be sure to Like this model, and post your makes!