SodaStream CO2 cylinder wall mount for kitchen cabinets

This model is a wall mount for the inside of any standard Ikea kitchen cabinet that is designed to hold two of any standard type of SodaStream CO2 cylinders. By using the wall mount the usually unhandy and clunky SodaStream CO2 cylinders can be stored nicely without any rolling around or risk of falling over. Moreover, this also allows utilizing spaces in your kitchen that might otherwise be unusable for any type of storage. In my case, for example, I managed to get the wall mount right underneath my kitchen sink, where I was able to use space that was totally wasted beforehand.

The wall mount fits in any standard Ikea kitchen cabinet with pre-drilled holes with a diameter of 5mm and hole spacing of 32mm. The distance between the two mounts needed to hold the cylinders is simply the already given distance between the existing rows of pre-drilled holes in your cabinet. Slight deviations in the hole spacing in each row can be compensated by the included slotted hole in the wall mount. The distance (center to center) between both mounting holes of each wall mount can therefore be in a range from 89-96mm. The mounts are secured to the cabinet using Ikea 100372 screws (http://tinyurl.com/4fepve84) or similar. 

For printing, I recommend the uploaded print settings with 4 walls, 4 top and bottom layers as well as 20% infill to achieve the necessary strength of the part. The wall mount I installed is made of PETG as it is close to my warm water supply, but PLA will work equally. For the print direction, I would also recommend the displayed positioning to optimally utilize the prints preferred strain-direction.