Articulated Octopus with armor

Take a look at my fuller description in the articulated octopus model.  

Articulated Print in Place Octopus Toy -Service Pack 1
 

Here a few highlighted recommendations and comments:

• I used .15mm slices using an .35mm or .4mm nozzle when printing at 50% model scale
• For best sucker detail, I recommend to use a raft
• I try and switch colors at about 1.05 to 1.2mm + raft height for a 50% scale
• Loctite 414 works best for me (but other cyanos should work fine as long as non-blooming) for those tentacles that you want fixed to the head.  They will get loose with repeated use and drops can be added onto separated pieces to tighten them up
• PETG works well if you want the pose-ability to last longer.
• For scaling, pose-ability turns to flexi getting closer to 100% scale