Elegoo Neptune 4/Pro Vibration Damper

Yet another vibration damper inspired by the Bambu Lab design. The damper is 30mm in diameter and 41mm in height. You have to remove the original ones and replace them with these. The damper is made to fit the original screws.

With this damper, my suggested 'SHAPER_CALIBRATE Y' settings for the bed changed from 2hump_ei with a max acceleration of 2.900mm/s^2 to mzv with a max acceleration of 7.400mm/s^2.

I'm using a FYSETC-PortableInputShaper for input shaping.
https://github.com/FYSETC/FYSETC-PortableInputShaper
 

Printsettings:

• TPU
• 0.2mm layer height
• two walls
• alternating extra walls
• 10% Gyroid infill.

These measurements include the TPU feet and my V5 fanshroud printed in Overture lightweight PLA. 
While I don't have any previous measurements for comparison, you can measure your printer before printing the feet.

If you appreciate what I've designed so far, feel free to buy me a coffee!

https://www.paypal.me/OrzOrzOrzPP
https://www.buymeacoffee.com/orzorzorz