FirstBIKE Lowering Kit / Adapter

A lowering kit for FirstBIKE with the brake.

Based on https://www.thingiverse.com/thing:3105214 
I had to change a few dimensions to fit my bike.

Parts:

• 2x DIN 912 M8x16 bolts
• 2x DIN 982 M8 or DIN 985 M8 nuts

Print settings:

• Prusament: PC Blend filament
• Infill: 30% grid
• Supports: Support on build plate only

• added a cutoff for the brake to the left part
• the holes were shifted slightly for both parts to fit better with the brake
• certain dimensions were slightly adjusted