Open 6x12 Parametric Lens Cone with Open Camera Focus Helicoid

A friend recently asked if I could print for him an Open 6x12 Camera. None of the available lens cones had the correct flange distance, and I wanted to give him the ability to have some degree of focusing. I decided to combine the work done by Morten.Kolve and amoser as that allowed me to create a cone with the correct dimensions, and have the helicoid be 3D printed.

Please note: this was my first attempt at using Fusion 360, and so it may not be the best combination of the two files. However, it does work as intended.

Also note, you will need to print the center and front files from amoser's design.

Combined this model with another to create a parametric lens cone with a printable helicoid.