M8-1.0mm nut and bolt

STL Models

M8x1.0mm nut and bolt

• Bolt
  • 20mm full thread
• Nut
  • Normal tolerance

Gcode and Print

I put an example Gcode for a bolt and a nut in one print, but I WOULD HIGHLY RECOMMEND TUNING SLICER YOURSELF to get the best results for your purpose. 

You may want to have more perimeters, print them individually to avoid stringing, more infill to give more strength.

I used PETG for the test print. PLA should work as well.

Thank you!

I would really appreciate you if you can support me !!!

Other models

• M6-1.0mm nuts and bolts (15-30mm)
• M6-1.0mm socket bolts (12-30mm)