Multigrid Shelves for the Multiboard Storage System
Description
PDFNew: I made a new version of all 12 shelves with a back with Bolt Holes for the Large Multiboard Bolts. I use the 9mm Flat Head. You can use longer if you have your tiles spaced from the wall. These will hold a lot more weight then the original shelves, though for maximum load you would want shelves with brackets or braces under them.
Shelves for Multigrid Bins. Designed for the ‘No Lock Holes’ bins. Because the bins are on a grid that matches the wall system, you can put a bunch in a row to make long shelves. There will be a slight space between them but the grid is on center and bins can bridge the gap.
The 3 deep and 4 deep shelves have 3 and 4 connectors respectively. They are a bit harder to attach to the wall tiles, especially if you have them spaced from the wall 8 or 15mm but hold pretty good. The should work fine as long as you don't put a lot of weight on it as there is no bracing under the shelf. In my tests the shelf will come off the wall before the connectors break off. Your mileage may vary.
No supports, standard Multiboard setttings of .2 layer height, 3 walls, 3 top 3 bottom. 15% infill.
I print mine at .2 layers, 3 walls 4 top, 3 bottom 15% gryoid. 4 tops doesn't add very many grams and and it covers the fill better. Shouldn't be too critical. You can do the small shelf to test.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
I took the Multigrid Panel frames for the Multiboard Storage System and turned them into shelves that mount directly into the Multiboard wall tiles.
@ericforbes217 did a remix of a new bracket so it would support my shelves. For each bracket you need 2 snap connectors.
