Bring Me The Horizon Keychain & Logo
Contains 4 versions:
Rounded edges keychain | Sharp edges keychain |
![]() | ![]() |
I printed it with following settings:
Nozzle | 0.4mm |
Layer Height | Variable - Adaptive (highest possible, smaller around hole) |
Wall Loops | 5 or more (to replace infill) |
Infill | Replaced by walls |
Supports | None |
Brim | None |
Printing took around 15 minutes on Bambu Lab A1 Mini (Standard speed)
Note: Keyring hole diameter is 2.65mm, keyring I used is 2.5mm thick
The author marked this model as their own original creation.