Update: Forgot to upload the mounting clip :D
I was always disappointed about those “stainless” metal baskets for the shower - a few months later they start rusting.
So i tried to design my own one - if it gets dirty i put it in the dishwasher or print another. If i need more space for more shower accessorys i print an extension :)
At the moment only the extension needs some glue - but it is designed to hold together by force (weigt in a shelf).
Everything else is just “clicked” together with those little clips. They are designed to stand out of the back, because i wanted to offer less surface for water as possible. So the clips are working as a spacer to the shower wall.
I believe the steps to assemble are just self explanatory togeher with the images.
The bare minimum are 2 of the wall-hooks and 2 of the rails - and then you can mix the shelfes. If neccessary print some extensions.
The Oral-B-Holder fits for ………. Oral-B :D it fits in the curve of the shelfes and can easily moved or removed - but also clamps if moved to the straigt part (front) of the shelf. It also has a slot to remove the toothbrush without tuching the holder with the brush.
If you want to print your own shelfes,remixes or need some adjustments, feel free to contact me. Also im planning to upload the complete Fusion360 if someone wants them.
Printing is fairly easy, printed everything except the wall hooks without support. Wall-hooks printed laying on the side with some small support will offer enougt strenght for the job.
The author marked this model as their own original creation.