Removal Tool for Oven-Lamp glass Neff / Siemens

This is a printable model of a removal tool for a round oven-lamp cover glass with 68mm outer diameter, and 44mm height, used in various ovens by Bosch, Siemens, NEFF, …

On some ovens from the BSH Group (Bosch, Siemens, NEFF, …), the cover glass for the oven-lamp is sometimes hard to remove by hand, since it's hard to grap, burned in and sometimes greasy. I even heard from peoples who gave up and took a flashlight instead, to check the progress of their food.
Yes, there is a original tool for this, which can be purchased, but why to buy something, when you can print it.

I kept the design pretty close to the original tool with part No. 613634.

Print Instruction:

I used PETG, but other materials might work, too.
For stability reasons, I set 3 Perimeters,  and 30% infill
I used supports, but it should work without, too depending on printer and filament.

All these setting are made in the pre-sliced 3mf file.