FLSUN SR Enclosure

This is an other Enclosure variant for the Flsun SR.
It not the fanciest looking housing but it did the job.
I reuse the extrusion profiles from my old anycubic kossel to build this thing. 
The hinges are based on the VzBot construction.

BOM: 
 

• 6x 20x40 671 mm long aluminium extrusion profiles (or twice as many 20x20)
• 12x 3d printed mounting brackets
• some M4 and M6 screws and M4 hammer nuts
• laser cutted acrylic/pc panels