Munchkin Box Insert - Optimized for Small Printers

Munchkin Box Insert: Optimized for Small Printers
 

I wanted to play around with Tinkercad and I made a box insert for the game “Munchkin”. This fits the box of German “Munchkin 1+2” (I do not know whether other boxes share those dimensions or not.)

There is also a small space (8 mm wide) to fit additional cards or small counters.

 In contrast to other inserts, I had three design goals:

• Small printers: optimized for small printers (like the Prusa Mini) because splitting existing models often results in very thin walls.
• Stability: so that you can take the insert out of the box regularly to play and use it as a cardholder in the game.
• Easy access to the first card of every pile: I would rather not have a rim around the first cards of a stack, to have easy access to them without lifting the insert.

Printing

I've printed my copy using Prusament Recycled PETG using 0.2 mm layer height and 3 perimeters. No brim or supports are needed.

Ideas for Improvement

• There is no dedicated spot for the D6 die
• The small “buffer” space of 8 mm could be wider
• … ?

The source Tinkercad project can be found here If you want to play around with it and improve it: https://www.tinkercad.com/things/jHG0fbKLt8c-munchkin-insert