FLSUN SR Rapido + VzHextrudORT custom printhead

This is a mod for the FLSUN SR to mount the Phaetus Rapido HF Hotend on the Effector and use the parts of the original extruder to replace this thing with an Vz HextrudORT to create a good Direct Drive System for this machine. For this mod you need to make a modification on the Effector mounting plate to increase the hole for the Rapido (like in the picture of this mod here: https://cdn.thingiverse.com/assets/5b/98/65/e9/b7/large_display_Effector_Modification.jpg )

As you can see in the pictures we reuse the original fans for the hotend cooling and the part cooling, too.

You need a new stepper motor like the LDO 36STH20-1004AHG pencake stepper motor.

I also create new fan ducts which has the optimized shape for this mod.

Addionally I create a simple mounting plate for the ADXL accelerometer. This is not for permanent mounting only for the measurement times.

I change the custom housing part of the Bondtech LGX Lite Support to make it fit with the Rapido HF Hotend and add an additional plate for the VzHextrudORT Extruder.