Voron Trident 250 Mesh Skirts

Use these files in SuperSlicer to generate two-color meshed skirts. The mesh object is 1.6mm high, so add a PAUSE in your gcode to switch colors at 1.8mm layer height. All parts are oriented flat for printing and easy importing into SuperSlicer. (note: make sure preferred orientation is set to 0, not 45, otherwise the skirt and the infill won't import lined up)

Recommended SuperSlicer settings:

Note: If you're going inverted electronics, you might want to remove the mesh from one of the hexagons so you can stick a finger through to lift up the deck panel (otherwise you'll need to come up with another solution to attach a handle to the deck panel).

Watch this video from Steve Builds for a walkthrough on how to make these

If you like this model and want to give back, please consider buying me a coffee.

Remix to add 1.6mm inserts into the skirt.