The Eye Of Osiris Crypt

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.

https://paypal.me/muddymaker

UPDATE January 10th 2024- Added 3mf files for folks that have multi material capable printers.

The eye of Osiris crypt. Dust proof and water resistant when used in conjunction with the TPU seal.

External overall dimensions are- H135mm W105mm

Internal overall dimensions are- H129mm W71.4mm at the neck W84mm internal body.

You'll need 6 M3X20mm fasteners, they all screw into the plastic.

Print the clips with PETG@100% infill.

If you print the optional TPU seal, print with 1 to 2 perimeters/walls and 0% infill, the seal needs to be squishy otherwise you will have trouble closing the lid. Make sure the seal goes in the groove with the flat side facing up towards the lid. Or you can source 3mm round foam seal from your local hardware or online.

No supports are needed.

Happy printing.