Fridge Magnet Digital Counter

Small and quick to print fridge magnet. When printed 7 times, the magnets can be arranged into any number from 0 to 9, just as on old (or simple) calculators.

The magnet needs one 5mm cube magnet, to be inserted midprint.

• Insert the pause on layer height 6.2mm if printing 0.3mm layers.
• Insert the pause on layer height 6.0mm if printing 0.2mm layers.
• Generally, if you slice in PrusaSlicer, insert the pause command on the first solid layer after the last layer with a rectangular hole

If done correctly, the magnet should be centered in the middle of the model. That way the magnet will hold on both sides equally strong.

My Print Settings:

• Material: PLA
• Layer height: 0.3mm
• Supports: no
• Perimeters: 2