Biomechanical Skull 2

New more detailed biomechanical skull is here….and with an optional frame.

This filament painting is 5mm thick so it will need time to print, as usual at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA Ziro Black
• PLA PolyTerra Charcoal Black
• PLA Overture Chocolate Matte
• PLA Overture Chocolate
• PLA Overture Brown
• PLA PolyTerra Peanut
• PLA+ Esun Bone White
• PLA Overture White

Swap Instructions:

• Start with Black
• At layer #7 (0.64mm) swap to Charcoal Black
• At layer #9 (0.8mm) swap to Chocolate Matte
• At layer #11 (0.96mm) swap to Chocolate
• At layer #16 (1.36mm) swap to Brown
• At layer #22 (1.84mm) swap to Peanut
• At layer #32 (2.64mm) swap to Bone White
• At layer #42 (3.44mm) swap to White for the rest.

For the frame, just be warned it is not a perfect match, in the chin it looses a little bit so print with your own risk :D - Choose whatever colors you like for it.