Deskmeet B660 Longer Video Card Front Cover

Allows you to use up to 280mm video cards with a single cutout to the front plate
2
15
0
227
updated January 6, 2024

Description

PDF

If you have a Deskmeet B660 and a longer video card, you can use tin snips or a grinder disk to make a cutout for the card and allow it to poke out the front. After doing so, this cover plate and frame can encase it while allowing the card to breathe. 

Steps for install are:

 

1: measure and mark where your video card intersects the front case wall

2: Cut out a slot for the video card. The metal is quite thin, and even the humble Dremel can accomplish the task with enough patience. 

3: Attach the intermediate frame using 2 m3 bolts and heat set inserts.

4: unscrew the power button PCB from the case frame, and screw it in using either an m3 or a 6/32 screw into the new front cover

5: Attach the front cover using 3 m3 bolts, and 3 heat set inserts in the intermediate frame. 

 

 

The original power switch PCB is easily relocated to the inside of the new cover, and the USB C port remains exposed. 

 

If you find anyone selling this model on Etsy or similar, point me to them and I will peel their toenails off using a fireplace poker. 

Tags



Model origin

The author marked this model as their own original creation.

License