Avis 5, Gopro Hero 7, central strap mount

Avis 5 Gopro Hero 7 mount

3 Versions:

1. 30 deg LOW.
2. 30 deg HIGH. (H in filename)
3. 25 deg HIGH. (H in filename)

H - Camera lowest corner is at 9 mm from top plate.

L - Camera lowest corner is at 4 mm from top plate.

Frame is available on Armattan Productions, made to order.

Avis is a bird in latin, aiming at agile, stiff and nice looking all around freestyle frame.

Top mounted battery 5" freestyle frame with interlocking 5 mm thick arms. Slightly squashed X configuration, motor to motor pitch / roll axis distance = 144 / 172 mm; diagonally 224.3 mm.

Arms designed to improve props effciency by reducing prop down flow obstruction, rigidity is validated via FEA and is superior to most 4 mm freestyle frames.

FC / ESC mounting patterns avaliable standard size 30.5 x 30.5 mm and 20 x 20 mm, M3 screw mounting holes.

Designed for today micro cams saving weight and reducing risk of camera damage via. semi rigid mounting TPU bracket.

Top and bottom plates are 2 mm, arms brace plate is 1.5 mm and 5 mm arms with chamfered edges.

Frame weight with all hardware - 100 gr.

Target build dry weight is 310-320 gr. with AUW at 550-560 gr. (with Session 5 and 1300 mAh 4S lipo)

TPU addon parts will be designed and avaliable on Thingiverse.

Suggested build height is at 20 mm. (Other build heights possible using different standoff height)

Kit content: Bottom plate, top plate, arms brace plate, x4 arms and x8 M3 press nuts. (All other hardware isn't included and need to be purchased seperately)

Additional hardware needed for assembly: (click on blue text for direct links)

1. x12 M3x6 Screws, Top / bottom plate standoffs mounting. (Ti is recommended to shave additional weight but steel will also work fine)
2. x8 M3x10 Screws, Bottom plate / arms / arms brace fixation. (Steel grade 12.9 screws only)
3. x4 M3x16 Screws, If using 20x20 stack - the x4 inner screws are used also to support the stack.
4. x6 M3 x 20 Aluminum knurled standoffs
5. x1 Micro cam TPU bracket (pair)