C1 Chaser 1200mm, FC 36x36 Mount, Holes 30.5x30.5

C1 Chaser 1200mm, FC 36x36 Mount

Designed to fit the C1 Chaser flying wing, provides base for mounting 36x36 FC, holes are at 30.5x30.5.

Recommended print materials:

1. PLA
2. PETG
3. ABS

Print orientation

STL is in correct orientation, no supports needed.

Assembly

1. Screw in M3 button head screws from bottom, length suitable for required FC / STACK, screws will thread themself in and lock.
2. Dry fit height and fit into craft.
3. Cut slits for the x4 prongs and glue in place using E6000.

Revisions Tracking

28.06.2019 - Added.

Will be happy to modify or adjust if someone needs something else.

Happy flying.