Presence sensor ESP8266, LD2410C, BME280 and WS2812 Status Led

Presence sensor for use in Home Automation

Parts used:

1. ESP12E (ESP8266) with breakout board, 26x38mm
2. HLK2410c 24G radar sensor, 22x16mm.
3. BME280 Temp, pressure and humidity sensor, 15x12mm
4. WS2812 LED, x4 pixels, 10x32mm.

Notes:

1. All parts have correct print orientation.
2. Minimal support required + I've used brim of 30 lines for all parts.
3. Stand part need threading x2 M3 threads for the BME280.
4. HLK2410c is mounted with double sided tape.
5. Led board is held by hot glue.
6. Plan your wire management inside the case :).

Revisions Tracking

07/05/2023 - Added.

Enjoy.