Silver Bullion Coin Container

This is a container for 1-ounce silver bullion coins. It will fit a stack of 10 American Eagle silver coins, but other coins of the same or smaller diameter may also fit.

I printed with random seam position to avoid an ugly vertical seam. I would strongly recommend sanding the seams on the inside of the container otherwise the coins may get scraped by those seams. I printed this on a Prusa Mini in PLA with a 0.4mm nozzle and 0.15mm layer height.

EDIT: I created a version 2 (Yellow/gold in the pics) that has a slightly smaller tolerance between the ID and OD threads and the notches on the outside are a bit bigger.