Mandalorian's Dark Saber

The Dark Saber!
This is a replica of the dark saber from the tv series The Mandalorian.
it is composed of 9 different parts to print and assemble.

Assembly items needed:
- 2x 0.25 in dowel rod

There are two holes that go through the entire saber where the dowel rods will slide in for strength.

Printing recommendations:
- 10% - 20% infill
- print standing
- supports possibly needed depending on printer, very little bridging on holes that don't go all the way through. I personally would not add supports.
- printing the hilt may need supports, or cut the hilt in half to have a flat area to print. Whichever is easier.

Entire sword is roughly 48 inches.
I have provided a full sword as well for free use!