Skadis • Bosch Zamo Laser Measure

This is a remix of Skadis Holder Bosch Zamo by Lansolo81 modified to be mounted with T-Nuts. 

I always prefer using this system in M2.5 or M3 to avoid any movement, so both options are available. A vertical alignment guide is directly integrated into the model to facilitate installation.

Discover Skadis Accessories That Use T-Nuts You can find many Skadis accessories that use Skadis T-Nuts in the Skadis T-Nuts Collection (over 170 models and growing). Also check out the “skadistnut” tag.

Accessories

This is a list of accessories required to mount the holder for both versions.

M2.5 Version

M3 Version

Printing

• Material: PLA
• Layer height: 0.2mm
• Supports: None
• Adhesion: None
• Infill: 15% Grid 

Alternatives

This mode lwas designed to be mounted on Ikea Skadis with T-nuts. But if you prefer other mounting methods, here are some alternatives:

• "Skadis Holder Bosch Zamo" by Lansolo81 (Skadis with hooks)
• “Bosch Zamo laser holder for IKEA Skadis pegboard” by evenstevens (Skadis with hooks)
• “Holder for BOSCH Zamo (2. Gen) Laser Measuring Tool” by  Hatrick3D (Honeycomb Storage)
• "Holder for Bosch Digital Laser Rangefinder Zamo" by DreiDEHorst 

I drew inspiration from the shape to completely redesign the model and adapt it for mounting with T-nuts.

Main differences:

• Mount using Skadis T-Nuts Mounting System
• A little smaller
• The back side is thicker to accommodate an M3 screw