Large Adjustable Monitor Shelf

Large (10.25 inches deep x 6 inches wide) version of the Adjustable Monitor Shelf.
23
111
0
814
updated January 5, 2024

Description

PDF

I needed a larger monitor shelf to fit the LEGO Technic Perseverance Rover I got for Christmas, which is pretty large and fairly heavy. I liked the design of GiskardReventlov'sAdjustable Monitor shelf”, but it wasn't deep enough for my needs. In order to support the additional weight and depth I had to increase the overall thickness of the shelf.

I printed two shelves and placed them side by side to support the rover. I did have to add a small piece of 2-sided 3M tape just below where the support arm makes contact with the monitor so the weight of items on the shelf didn't cause the shelf to drop a bit (pic included). I could probably sturdy up the support arm a bit and adjust the length to where that's not needed, but for now it's working fine.

In the pics I have a few strips of black electrical tape to keep the rover from slipping when bumped since I have it angled slightly higher in the back.


Filament: Sunlu PLA+ 
Layer Height: 0.2mm
Supports: None
Infill: 20% Cubic (seems sturdy enough)
 

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

Increased depth of tray to 10 ¼ inches (260mm), doubled the thickness of tray to 8mm, adjusted the size of the honeycomb (holes about twice as large), increased size of monitor “lip” from 4mm to 8mm, and lengthened the support arms to account for the larger tray. 

License